DIY Detail 1 Year Graphene Ceramic Coating Spray 120ml | The Clean Garage
DIY Detail 1 Year Ceramic Graphene Coating is a TEOS-based ceramic coating that’s easy to apply, adds gloss, slickness, and long-term protection. The TEOS (Tetraethyl Orthosilicate) formulation helps reduce clogging and provides exceptional fracturing resistance, making this coating reliable and user-friendly for both enthusiasts and professionals.
Application can be done using either the included sprayers or dropper insert, the choice is yours.
Applicator not included
Where It Can Be UsedDIY Detail 1 Year Ceramic Graphene Coating is safe and effective on a wide range of exterior surfaces, including:
- Automotive paint
- PPF and vinyl (gloss and matte)
- Glass
- Trim and chrome
- Wheels
Key Benefits1 year ceramic graphene protectionTEOS-based formula for improved durability and resistance to cloggingAdds noticeable gloss and slicknessMultiple application methods supportedCompatible with paint protection film and vinyl wraps
Application Instructions
Surface PrepStart with a clean, dry, and fully decontaminated surface.Surface temperature must be above 40°F (5°C) and remain there for at least 1 hour.For best results, prep the surface using DIY Detail Panel Prep or C6 Ceramics Adhesion Promoter Polish (APP).
Spray / Towel MethodSpray several times onto a short-nap towel (Level 1) and spread over the surface to be protected.For additional panels, spray 3–4 times onto the towel.Allow the coating to flash, then level using a Freebird 400 towel.Spray / Applicator MethodSpray several times onto a foam coating applicator and spread evenly over the surface.For additional panels, apply 3–4 sprays to the applicator.Allow to flash, then level with a Freebird 400 towel.Dropper MethodRemove the sprayer and insert the dropper, ensuring it is seated properly.Apply 8–10 drops to the applicator and spread over the surface.For additional panels, apply 2–3 drops.Allow to flash, then level with a Freebird 400 towel.
Post-Application Care
Vehicle can return to service after 1 hourWash using DIY Detail Rinse Less Wash after 3 daysFull cure achieved in 7 daysAfter application, remove the sprayer and spray back into the bottle to clear remaining coating. Clean the sprayer using DIY Detail Rinse Less Wash or DIY Detail Panel Prep.
