ELIMINATE SNAGS AND MAINTAIN DIELECTRIC INTEGRITY ON EVERY PULL
When you’re navigating crowded 3/4-inch EMT or pulling through PVC runs near energized gear, a snapped tip can derail your entire schedule. These replacement plastic tips are engineered for the high-stress environment of commercial wire pulling. Designed specifically for our polyester tapes, the threaded attachment ensures the tip stays on the line even when you’re muscling through tight 90-degree bends. The non-conductive construction provides that critical layer of safety when fishing into live panels or junction boxes, while the anti-catch geometry glides over existing conductors without hanging up or damaging insulation.
- / Non-conductive plastic construction ensures maximum safety when fishing near energized circuits or in sensitive panels.
- / High-strength threaded attachment provides a reinforced connection to the tape, preventing mid-conduit failures and lost tips.
- / Optimized anti-catch tip geometry reduces friction and prevents snagging on conduit joints or existing wire runs.
- / Fully compatible with the M18 FUEL ANGLER 100′ Non-Conductive tape for powered pulling efficiency.
TECHNICAL SPECIFICATIONS
| Quantity | 4-Pack |
| Material | Non-Conductive Plastic |
| Attachment Type | Threaded |
| Tip Geometry | Anti-Catch |
| Compatibility | Milwaukee Polyester Fish Tapes & M18 FUEL ANGLER 100′ Non-Conductive |
